Notice: The new device has a scratch-resistant protective film on the screen. Remove the protective film before use to ensure that the screen is more clearly displayed
BT-360 battery tester can do battery test, cranking test, charging test and other additional functions.
Battery test is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the ageing extent, which provide reliable analysis evidence for the test and maintenance of the battery.
It notifies the user to replace a battery in advance when the battery getting aged.
Cranking test is mainly to test and analyze the starting motor.
Through testing the actual required cranking current and cranking voltage of the starting motor, it can find out whether the starting motor works fine.
Note: if you need version 2, Include a note when you ordered
VERSION 1: languages with English, Spanish, German, French, Russian and Italian.
VERSION 2: languages with English, Polish, Chinese, Dutch and Japanese.
1. Test all kind of 12V automotive cranking lead acid battery including ordinary lead-acid battery, AGM flat plate battery, AGM spiral battery, Gel battery and etc.
2. Directly detect bad cell battery.
3. Polarity reverse connects protection, reverse connection will not damage the tester of effect the vehicle and battery.
4. Directly test the battery with loss of electricity, no need to full charge before testing.
5. Testing standards include currently the world’s majority of battery standards: CCA, JIS, DIN, IEC, EN, SAE, GB.
6. Support multi-languages with two versions.
Benefits for Battery test :
1. Conductance correlates directly to the battery capacity
2. passive testing method is safe.
3. Never discharges or drain the battery.
4. Able to test the condition of discharged battery.
5. Consistent and repeatable results.
6. Provides unique indication of battery conditions.
7. Provides check the Alternator’s charging and Starter’s cranking conditions. It is maintenance-free and no internal batteries required.
8. Powers up when connected to the battery posts during testing.
Test Result: Good or Replace
Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (m )
Life in percentage (%)
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded);
VRLA or Maintenance Free (MF);
Sealed Maintenance Free (SMF);
Absorption Glass Mat (AGM) and GEL cell.
The major battery standards JIS, SAE, EN, DIN and IEC are supported.
System voltage: 12 Volts
Input voltage range: 9V~15V
Power requirements: No internal batteries required. Power on when hooked up during testing.
Testing range: 100 ~ 2000 CCA, 100 ~ 1200 DIN, 100 ~ 1200 IEC, 100 ~ 1700 EN
AH range: 30-220AH
Working Environment Temp.: -20°C-50°C
Tips: CCA100-2000, 30-220Ah, which is the highest CCA in the market.
1*BT360 Main Unit
1*An English Manual for BT360